Research article
Assessment of Detailed Energy Conservation Potentials: The Case of the Ethiopian Leather Industry
https://doi.org/10.47836/pjst.32.S1.03KeywordsElectrical energy, energy audit, energy savings, economics, leather, thermal energy
Article content
Abstract
One of the most crucial components in any industrial operation is energy. However, the supply is not limitless. One of the key ingredients in cement production is energy, whose cost share ranges from 8 to 15% of overall production costs in developed nations but is much more in undeveloped nations. Therefore, the objective of this extensive research was to carry out a thorough energy conservation audit at the Sheba leather factory, located in the city of Mekelle, in the north region of Ethiopia. The specific objective of this research was to analyse the patterns of power consumption, identify energy-saving techniques, as well as to propose energy-saving recommendations for their implementation. It was obtained using primary and secondary data from the industry personnel. As a result, a total of 19 recommendations for energy saving were found and were forwarded for consideration. These recommendations have the potential to save a total of about $ 29900 annually, but their implementation would cost close to $ 15900, with a payback period of seven months. These recommendations also cover the utilities of the boiler, motors, blower, air compressors, cooling tower, and lighting. In order to lower their energy use, economic benefits are also considered.
Supporting literature
References
- Al-Ghandoor, A., Al-Hinti, I., Jaber, J. O., & Sawalha, S. A. (2008). Electricity consumption and associated GHG emissions of the Jordanian industrial sector: Empirical analysis and future projection. Energy Policy, 36(1), 258-267. https://doi.org/10.1016/j.enpol.2007.09.020
- Benhelal, E., Zahedi, G., Shamsaei, E., & Bahadori, A. (2013). Global strategies and potentials to curb CO2 emissions in cement industry. Journal of Cleaner Production, 51, 142-161. https://doi.org/10.1016/j.jclepro.2012.10.049
- Berry, J., Griffin, M., & Wright, A. L. (2006). Steam pressure reduction, opportunities, and issues. Oak Ridge National Lab. (ORNL).
- Bhukya, P., & Basak, D. (2014). Energy saving technologies in industries-an overview. International Journal of Scientific and Research Publications, 4(4), 499-504.
- Bureau of Energy Efficiency. (2018). Energy conservation guidelines for industries. Bureau of Energy Efficiency.
- Da Cunha, F. (2007). Compressed air: Energy efficient reference guide, CEA Technology Inc. (CEATI) Customer Energy Solution Interest Group (CESIG). https://natural-resources.canada.ca/sites/nrcan/files/energy/pdf/energystar/compressed-air-ref-eng.pdf
- Edenhofer, O., Pichs-Madruga, R., & Sokona, Y. (Eds.). (2012). Renewable energy sources and climate change mitigation. Climate Change.
- Fawkes, S., Oung, K., Thorpe, D., Zhu, X., & Farrell, T. C. (2016). Best practices and case studies for industrial energy efficiency improvement: An introduction for policy makers. UNEP DTU Partnership.
- Ganguly, S., Raje, S., Kumar, S., Sartor, D., & Greenberg, S. (2016). Accelerating energy efficiency in Indian data centers: Final report for phase I activities. Berkeley National Laboratory.
- Gebreslassie, M. G., Kalamegam, M. N., Gebrelibanos, K. G., Mebrahtu, A. H., Bahta, S. T., Nurhussien, F. F., &Yohannes, K. G. (2022). Evidence-based energy conservation potentials and policy implications in the textile and garment industries of Ethiopia. Energy Efficiency, 15(6), 39. https://doi.org/10.1007/s12053-022-10047-8
- IEA. (2020). Energy technology perspectives (2020). International Energy Agency. https://iea.blob.core.windows.net/assets/7f8aed40-89af-4348-be19 c8a67df0b9ea/Energy_Technology_Perspectives_2020_PDF.pdf
- Kingston, R., & Baghzouz, Y. (1994, May 1-5). Power factor and harmonic compensation in industrial power systems with nonlinear loads [Paper presentation]. Proceedings of Industrial and Commercial Power Systems Conference, Irvine, Canada. https://doi.org/10.1109/ICPS.1994.303580
- Mulatu, D., Habte, L., & Ahn, J. W. (2018). The cement industry in Ethiopia. Journal of Energy Engineering, 27(3), 68-73. https://doi.org/10.5855/ENERGY.2018.27.3.068
- Önüt, S., & Soner, S. (2007). Analysis of energy use and efficiency in Turkish manufacturing sector SMEs. Energy Conversion and Management, 48(2), 384-394. https://doi.org/10.1016/j.enconman.2006.07.009
- Ramakrishna, G. (2014). Energy consumption and economic growth: The Ethiopian experience. Journal of Economic and Financial Modelling, 2(2), 35-47.
- Rossiter, A. P., & Jones, B. P. (Eds.). (2015). Energy management and efficiency for the process industries. John Wiley & Sons.
- Singh, P., Ansu, A. K., Sharma, R. K., Kumari, P., Kumar, A., & Kumar, R. (2023). Development, thermal properties, and reliability testing of eutectic polyethylene glycol as phase change materials for thermal energy storage applications. International Journal of Thermophysics, 44(3), Article 39. https://doi.org/10.1007/s10765-022-03146-2
- Sony, M., & Mekoth, N. (2018). A qualitative study on electricity energy-saving behaviour. Management of Environmental Quality: An International Journal, 29(5), 961-977. https://doi.org/10.1108/MEQ-02-2018-0031
- Tesema, G., & Worrell, E. (2015). Energy efficiency improvement potentials for the cement industry in Ethiopia. Energy, 93(Part 2), 2042-2052. https://doi.org/10.1016/j.energy.2015.10.057
- Zeitz, R. A. (Ed.). (1997). Council of Industrial Boiler Owners (CIBO): Energy efficiency handbook. CIBO
