The present paper investigates experimentally effect of applied load and different velocity on the coefficient of friction between two interacting surfaces (human skin and Ultra-high-molecular-weight polyethylene (UHMW- polyethylene) at static and dynamic friction. It is possible to conclude specific point based on the above practical part and frictional analysis of this investigation as the most important mechanical phenomenon was creep has been observed a stick time interval where the static friction force is significantly increased during this stroke. The analytical model for stick-slip of skin and UHMWPE is proposed. The difference between static and kinetic friction defines the amplitude of stick-slip phenomena. The contact pressure, the sliding velocity, and rigidity of system determine the stability conditions of the movement between skin and UHMWPE. Experiments were carried out by developing a device (friction measurement). Variations of friction coefficient during the time at different normal load 4.6 and 9.2 N and low sliding velocity 4, 5, 6 and 7 mm/min were experimentally investigated. The results showed that the friction coefficient varied with the normal load and low sliding velocity. At static friction, the coefficient of friction decreased when the time increases, whereas, at dynamic friction, the coefficient of friction decreased when the time increased at normal load 4.6 and 9.2 N.

• Boyer, G., Zahouani, H., Le Bot, A., & Laquieze, L. (2007). In vivo characterization of viscoelastic properties of human skin using dynamic micro-indentation. In 2007 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (pp. 4584-4587). IEEE Conference Publication. https://doi.org/10.1109/IEMBS.2007.4353360

• Chatelet, E., Michon, G., Manin, L., & Jacquet, G. (2008). Stick/slip phenomena in dynamics: Choice of contact model. Numerical predictions & experiments. Mechanism and Machine Theory, 43(10), 1211-1224.‏ https://doi.org/10.1016/j.mechmachtheory.2007.11.001

• Crowther, A., Zhang, N., Liu, D. K., & Jeyakumaran, J. K. (2004). Analysis and simulation of clutch engagement judder and stick-slip in automotive powertrain systems. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 218(12), 1427-1446.‏ https://doi.org/10.1243/0954407042707731

• Derler, S., & Rotaru, G. M. (2013). Stick–slip phenomena in the friction of human skin. Wear, 301(1-2), 324-329.‏ https://doi.org/10.1016/j.wear.2012.11.030

• Dong, C., Shi, L., Li, L., Bai, X., Yuan, C., & Tian, Y. (2017a). Stick-slip behaviours of water lubrication polymer materials under low speed conditions. Tribology International, 106, 55-61.‏ https://doi.org/10.1016/j.triboint.2016.10.027

• Dong, C., Yuan, C., Bai, X., Qin, H., & Yan, X. (2017b). Investigating relationship between deformation behaviours and stick-slip phenomena of polymer material. Wear, 376, 1333-1338.‏ https://doi.org/10.1016/j.wear.2017.01.061

• Mulliah, D., Kenny, S. D., & Smith, R. (2004). Modeling of stick-slip phenomena using molecular dynamics. Physical Review B, 69(20), Article 205407.‏ https://doi.org/10.1103/PhysRevB.69.205407

• Perfilyev, V., Moshkovich, A., Lapsker, I., Laikhtman, A., & Rapoport, L. (2013). The effect of vanadium content and temperature on stick–slip phenomena under friction of CrV (x) N coatings. Wear, 307(1-2), 44-51.‏ https://doi.org/10.1016/j.wear.2013.08.012

• Tang, W., Ge, S. R., Zhu, H., Cao, X. C., & Li, N. (2008). The influence of normal load and sliding speed on frictional properties of skin. Journal of Bionic Engineering, 5(1), 33-38. https://doi.org/10.1016/S1672-6529(08)60004-9

• Terrand-Jeanne, A., & Martins, V. D. S. (2016). Modeling’s approaches for Stick-Slip phenomena in drilling. IFAC-PapersOnLine, 49(8), 118-123.‏ https://doi.org/10.1016/j.ifacol.2016.07.428

• Tu, C. F., & Fort, T. (2004). A study of fiber-capstan friction. 2. Stick–slip phenomena. Tribology International, 37(9), 711-719.‏ https://doi.org/10.1016/j.triboint.2004.02.009

• Wee, H., Kim, Y. Y., Jung, H., & Lee, G. N. (2001). Nonlinear rate-dependent stick-slip phenomena: Modeling and parameter estimation. International Journal of Solids and Structures, 38(8), 1415-1431.‏ https://doi.org/10.1016/S0020-7683(00)00058-5