Home / Regular Issue / JST Vol. 31 (3) Apr. 2023 / JST-3738-2022


Effect of Moisture Content on Frictional Properties of Some Selected Grains in Indonesia

Nursigit Bintoro, Alya Iqlima Zahra, Azizah Putri Khansa, Muftia Chairin Nissa, Aldhayu Sam Safira and Sastika Nidya Ashari

Pertanika Journal of Science & Technology, Volume 31, Issue 3, April 2023

DOI: https://doi.org/10.47836/pjst.31.3.04

Keywords: Direct shear cell, grain, moisture content, φ, θ

Published on: 7 April 2023

The frictional property of grains is one of the most important engineering parameters in developing solid bulk handling of grains. It is necessary for designing agricultural facilities and production process activities. These properties are expressed as internal friction angle (φ) and wall friction angle (θ), which are known to be affected by the moisture content of the grains. This research investigates the effect of moisture content on the values of φ and θ of some selected grains. In the research, some indigenous Indonesian grain types, including rough rice, white rice, corn, soybean, and coffee, each in three varieties and three level of moisture contents, were used as the research samples. Those angles were measured using a self-constructed direct shear cell apparatus. Three different normal loads for each grain type were used with three replications. It is concluded that φ and θ of the tested grains increase with moisture contents with different trends of increments. The relationship of those angles with moisture contents can be expressed as linear regression equations. The slope of the regression lines for both φ and θ is significantly affected by grain type (p<0.05). For φ, coffee (Excelsa) is the most susceptible to the change in moisture content, while dent corn (Hibrida) is the least affected one. For θ, soybean (Galunggung) is the most susceptible to the change in moisture content, while rough rice (Mapan 5) is the least affected one.

  • Alghalayini, R. (2020). Improving an internal material handling system. A case study of a Swedish company in food industry. Jönköping University, Sweden. https://www.diva-portal.org/smash/get/diva2:1458374/FULLTEXT01.pdf

  • Bako, T., & Bardey, I. A. (2020). Engineering properties of acha (digitaria exilis) grains in relation to the design of grain processing machines. Agricultural Engineering International: CIGR Journal, 22(3), 159-170.

  • BPS-Statistics Indonesia. (2021). Statistical Yearbook of Indonesia 2021. Badan Pusat Statistik. https://www.bps.go.id/publication/2021/02/26/938316574c78772f27e9b477/statistik-indonesia-2021.html

  • Brar, H. S., Sidhu, G. K., & Singh, A. (2016). Effect of moisture content on engineering properties of oats (Avena sativa L.). Agricultural Engineering International: CIGR Journal, 18(3), 186-193.

  • Bucklin, R., Thompson, S., Montross, M., & Abdel-Hadi, A. (2013). Grain storage systems design. In M. Kutz (Ed.), Handbook of Farm, Dairy and Food Machinery Engineering, (pp. 123-175). Elsevier. https://doi.org/10.1016/B978-0-12-385881-8.00007-0

  • Dauda, S. M., Ismail, F., Balami, A. A., Aliyu, M., Mohammed, I. S., & Ahmad, D. (2019). Physical and mechanical properties of raphia palm kernel at different moisture contents. Food Research, 3(4), 305-312.

  • Dawange, S. P., & Jha, S. K. (2019). Moisture dependent physical properties of quality protein maize. Journal of Agricultural Engineering, 56(3), 48-65.

  • de Oliveira, G. H. H., Corrêa, P. C., de Oliveira, A. P. L. R., Vargas-Elías, G. A., & Júnior, C. C. (2022). Arabica coffee flow properties assessed using different roasts and particle sizes during storage. Brazilian Journal of Food Technology, 25, 1-12, https://doi: 10.1590/1981-6723.02621

  • Ehiem, J. C., Ndirika, V. I. O., & Raghavan, G. S. V. (2015). Frictional properties of canarium schweifurthii engl. fruits and their interaction with moisture content and shape. International Journal of Engineering and Applied Sciences (IJEAS), 2(8), 30-34.

  • Elyashiv, H., Bookman, R., Siemann, L., Brink, U., & Huhn, K. (2020). Numerical characterization of cohesive and non-cohesive ‘sediments’ under different consolidation states using 3D DEM triaxial experiments. Processes, 8(10), Article 1252. https://doi.org/10.3390/pr8101252

  • Etim, P. J., Alonge, A. F., & Akpan, G. E. (2021). Effect of moisture content on some mechanical and frictional properties of mucuna bean (Mucuna crens) relevant to its cracking. Agricultural Engineering International: CIGR Journal, 23(4), 265-273.

  • Fadeyibi, A., Lamidi, W. A., & Ademola, S. M. (2021). Engineering and proximate properties of miracle berry fruit (Synsepalum dulcificum L.). Agricultural Engineering International: CIGR Journal, 23(4), 227-235.

  • Fayed, M. I. A., El-Shal, M. S., & Omar, O. A. (2020). Determination of some apricot seed and kernel physical and mechanical properties. Agricultural Engineering International: CIGR Journal, 22(4), 229-237.

  • FAO. (2021). Post-harvest Losses. Food and Agricultural Organization. https://www.fao.org/3/t0522e/T0522E04.htm#Post-harvest%20losses

  • Gierz, L., Kolankowska, E., Markowski, P., & Koszela, K. (2022). Measurements and analysis of the physical properties of cereal seeds depending on their moisture content to improve the accuracy of DEM simulation. Applied Science, 12(2), Article 549. https://doi: 10.3390/app12020549

  • Hasmadi, M. (2021). Effect of water on the caking properties of different types of wheat flour. Food Research, 5(1), 266-270. https://doi: 10.26656/fr.2017.5(1).412

  • Inekwe, G., Kiniyi, B. U., Umunna, M., & Udensi, N. K. (2019). Effect of moisture content on physical properties of mung bean (Vignaradiata L.). International Journal of Engineering Research, 8(07), 54-59.

  • International Coffee Organization. (2021). Coffee Year Production by Country. https://www.ico.org/prices/po-production.pdf

  • Jan, K. N., Panesar, P. S., & Singh, S. (2019). Effect of moisture content on the physical and mechanical properties of quinoa seeds. International Agrophysics, 33(1), 41-48. https://doi.org10.31545/intagr/104374

  • Kaliniewicz, Z., Jadwisieńczak, K., Żuk, Z., Konopka, S., Frączyk, A., & Krzysiak, Z. (2020). Effects of friction plate hardness and surface orientation on the frictional properties of cereal grain. International Journal of Food Science, 2020, Article 6639233. https://doi.org/10.1155/2020/6639233

  • Kopeć-Jarosz, A., & Wójcik, A. (2021). The impact of moisture and number of contact points on the process of friction in plant granular materials. Processes, 9(2), Article 215. https://doi.org/10.3390/pr9020215

  • Kruszelnicka, W. (2021). Study of selected physical-mechanical properties of corn grains important from the point of view of mechanical processing systems designing. Materials, 14(6), Article 1467. https://doi:10.3390/ma14061467

  • Larsson, S. (2019). Particle Methods for Modelling Granular Material Flow. [Doctoral dissertation]. Lulea University of Technology, Sweden. https://www.diva-portal.org/smash/get/diva2:1296317/FULLTEXT01.pdf

  • Li, X., Du, Y., Guo, J., & Mao, E. (2020). Design, simulation, and test of a new threshing cylinder for high moisture content corn. Applied Science, 10(14), Article 4925. https://doi.org/10.3390/app10144925

  • Liu, J., S. Du, S., & Fu, Z. (2021). The impact of rural population aging on farmers’ cleaner production behavior: Evidence from five provinces of the north China plain. Sustain, 13(21), Article 12199. https://doi: 10.3390/su132112199

  • McLaren, C. P., Kovar, T. M., Penn, A., Müller, C. R., & Boyce, C. M. (2019). Gravitational instabilities in binary granular materials. Proceeding of The National Academy of Science, USA, 116(19), 9263-9268. https://doi.org/10.1073/pnas.1820820116

  • Mohite, A. M., Sharma, N., & Mishra, A. (2019). Influence of different moisture content on engineering properties of tamarind seeds. International Agricultural Engineering Journal, 21(1), 220-224.

  • Nicastro, R., & Carillo, P. (2021). Food loss and waste prevention strategies from farm to fork. Sustainability, 13(10), Article 5443. https://doi.org/10.3390/su13105443

  • Okolo C. A., Haruna S. A., Chukwu O., & Madu U. O. (2020). Comparative studies of material handling time for maize (Zea mays. Linn.) and sorghum (Sorghum bicolor L. Moench) in a typical 50 metric tonnes (MT)/hr Silo. International Journal of Engineering Research and Technology, 9(1), 457-461.

  • Pawlak, K., & Kołodziejczak, M. (2020). The role of agriculture in ensuring food security in developing countries: Considerations in the context of the problem of sustainable food production. Sustainability, 12(13), Article 5488. https://doi.org/10.3390/su12135488

  • Rasti, A., Adarmanabadi, H. R., Pineda, M., & Reinikainen, J. (2021). Evaluating the effect of soil particle characterization on internal friction angle. American Journal of Engineering and Applied Sciences, 14(1), 129-138. https://doi: 10.3844/ajeassp.2021.129.138

  • Rodrigues, G. B., Resende, O., de Oliveira, D. E. C., Silva, L. C. M., & Junior, W. N. F. (2019). Mechanical properties of grains sorghum subjected to compression at different moisture contents. Journal of Agricultural Science, 11(4), Article 279. https://doi: 10.5539/jas.v11n4p279

  • Sadiku, O. A., & Omogunsoye, D. (2021). Moisture - Influenced friction properties of ackee apple (Blighia sapida) seeds. Research in Agricultural Engineering, 67(1), 26-33. https://doi: 10.17221/75/2020-RAE

  • Shi, G., Li, J., Ding, L., Zhang, Z., Ding, H., Li, N., & Kan, Z. (2022). Calibration and tests for the discrete element simulation parameters of fallen jujube fruit. Agriculture, 12(1), Article 38. https://doi.org/10.3390/agriculture12010038

  • Stephens, M. P., & Meyers, F. E. (2013). Manufacturing facilities design and material handling. Purdue University Press.

  • Sui, Z. F., Yi, W., Lu, Y. G., & Deng, L. (2021). Experimental and numerical simulation study on the shear strength characteristics of magnolia multiflora root-soil composites. Advances in Civil Engineering, 2021, Article 6642594. https://doi: 10.1155/2021/6642594

  • Tabari, S. A. M., & Shooshpasha, I. (2021). Evaluation of coarse-grained mechanical properties using small direct shear test. International Journal of Geotechnical Engineering, 15(6), 667-679. https://doi.org/10.1080/19386362.2018.1505310

  • Tang, H., Xu, C., Jiang, Y., Wang, J., Wang, Z., & Tian, L. (2021). Evaluation of physical characteristics of typical maize seeds in a cold area of north China based on principal component analysis. Processes, 9(7). Article 1167. https://doi.org/10.3390/pr9071167

  • United States Department of Agriculture. (2022). World Agricultural Production. United States Department of Agriculture, Foreign Agricultural Service. https://usdabrazil.org.br/

  • Vagová, A., Hromasová, M., Linda, M., & Vaculík, P. (2019). Determining external friction angle of barley malt and malt crush. Agronomy Research, 17(5), 2106-2114. https://doi.org/10.15159/ar.19.149

  • Vagsholm, I., Arzoomand, N. S., & Boqvist, S. (2020). Food security, safety, and sustainability-getting the trade-offs right. Frontier in Sustainable Food Systems, 4(16), 1-4. https://doi.org/10.3389/fsufs.2020.00016

  • Wang, B., & Wang, J. (2019). Mechanical properties of maize kernel horny endosperm, floury endosperm and germ. International Journal of Food Properties, 22(1), 863-877. https://doi.org/10.1080/10942912.2019.1614050

  • Wang, J., Xu, C., Qi, X., Zhou, W., & Tang, H. (2022). Discrete element simulation study of the accumulation characteristics for rice seeds with different moisture content. Foods, 11(3), Article 295. https://doi: 10.3390/foods11030295

  • Wojcik, A., Fraczek, J., & Niemczewska-Wojcik, M. (2020). The relationship between static and kinetic friction for plant granular materials. Powder Technology, 361, 739-747. https://doi.org/10.1016/j.powtec.2019.11.048

  • Xu, Q., Cheng, X., & Chen, X. (2019). Models for predicting frictional properties of rapeseed. International Agrophysics, 33(1), 61-66. https://doi.org/10.31545/intagr/104377

  • Zeng, C., & Wang, Y. (2019). The shear strength and dilatancy behavior of wheat stored in silos. Complexity, 2019, Article 1547616. https://doi.org/10.1155/2019/1547616

  • Zhang, S., Fu, J., Zhang, R., Zhang, Y., & Yuan, H. (2022). Experimental study on the mechanical properties of friction, collision and compression of tiger nut tubers. Agriculture, 12(1), Article 65. https://doi.org/10.3390/agriculture12010065

  • Zhu, Y., Miao, S., Li, H., Han, Y., & Lan, H. (2022). An empirical shear model of interface between the loess and hipparion red clay in a loess landslide. Frontiers in Earth Science, 9, 1-18. https://doi.org/10.3389/feart.2021.806832

  • Zou, Z., Zhang, Q., Xiong, C., Tang, H., Fan, L., Xie, F., Yan, J., & Luo, Y. (2020). In situ shear test for revealing the mechanical properties of the gravelly slip zone soil. Sensors, 20(22), Article 6531. https://doi.org/10.3390/s20226531